F-tone公司專業研發制造10G SFP+ 無源電纜、10G SFP Passive Cable,符合MSA SFF-8431, 應用于10G以太網等數據中心互聯場景。100%完美兼容全系列品牌服務器,交換機,路由器,PDH/SDH傳輸設備,EPON,GPON,10G EPON,10G GPON,WDM PON基站等等全系列設備

SFP+ Direct Attach Cables , 1m、3m、5m、7m、10m Reach

Features

1. Support for multi-gigabit data rates up to 10.5Gbps
2. Data rates backward compatible to 1Gbps
3. Support for 1x, 2x, 4x and 8x Fibre Channel data rates
4. Hot-pluggable SFP 20PIN footprint
5. I/O Connector designed for high speed differential signal applications
6. Improved Pluggable FormFactor(IPF) compliant for enhanced EMI/EMC performance
7. Low Power Consumption < 0.5W
8. Power Supply :+3.3V
9. Compatible to SFP+
10. Temperature Range: 0~ 70 °C
11. RoHS Compatible

Applications

1. High capacity I/O in Storage Area Networks, Network Attached Storage, and Storage Servers
2. Switched fabric I/O such as ultra high bandwidth switches and routers
3. Data center cabling infrastructure
4. High density connections between networking equipment

Product Description

The SFP+ cable assemblies are high performance, cost effective I/O solutions for 10Gb Ethernet and 10G fibre Channel applications. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget. The high speed cable assemblies meet and exceed Gigabit Ethernet and Fibre Channel industry standard requirements for performance and reliability..

Recommended Operating Conditions

Systems

Supported Length

1m, 3m, or 5m typical & customer specific requirements

Pin Descriptions

VeeT

Transmitter Ground

1. Signals not supported in SFP+ Copper pulled-down   to VeeT with 30K ohms resistor

2. Passive cable assemblies do not support LOS and TX_DIS

Ordering information