F-tone CFP-40G-10KM, CFP-40G-20KM, CFP-40G-40KM 40G CFP transceiver modules are designed for use in 40 Gigabit Ethernet links over single mode fiber. They are compliant with the CFP MSA1 and IEEE 802.3ba 40GBASE-LR4, 40GBASE-ER4. Digital diagnostics functions are available via an MDIO interface, as specified by the CFP MSA.

SNAP12 Parallel Transmitter Module:F-tone's SNAP12 transmitter module is designed to be used in links of up to 32Gb/s over multimode fiber.  They are RoHS-6 compliant and lead-free per Directive 2002/95/EC and F-tone Application Note an38.

The F-tone CXP-100G-150XX is a 10-channel CXP pluggable optical transceiver module for 100 Gigabit Ethernet applications. The transceiver is optimized for high-speed, short-range data communications. It has 10 data lanes in each direction with greater than 100 Gbps of aggregate bandwidth. Each lane can operate at 10.3125 Gbps up to 100 meters using OM3 fiber and 150 meters using OM4 fiber. 

The F-tone CXP-150G-XX is a 12-channel CXP pluggable optical transceiver module for 100GbE+ applications. The transceiver is optimized for high-speed, short-range data communications. It has 12 data lanes in each direction with an aggregate bandwidth of 150 Gbps. Each lane can operate at 12.5 Gbps up to 50 meters using OM3 fiber and 65 meters using OM4 fiber.

FT-3-151537軍品級雙纖表貼DIN光模塊

特性

• 更緊湊的結構設計——模塊高度僅8mm
• 適應于高速信號完整性的表貼I/O引腳
• 全金屬外殼
• 軍品級溫度范圍，采用抗振動設計
• 具備接收數據信號檢測功能
• 僅使用+3.3 V單電源
• 光接口形式為DIN式
• 雙纖雙向表貼型光收發模塊
• 3.3V，850nm VCSEL，多模
• 155Mbps ～ 4.25Gbps
• 更選進的工藝

SNAP12 4發4收光模塊：8路并行光發送模塊和接收模塊為甚短距離的高速數據處理和傳輸提供高可靠的多路數據鏈接， 解決了數據傳輸的瓶頸問題。為系統提供了低成本、高密度的數據傳輸方案。SNAP12 4發4收光模塊由8路獨立的光通道組成，每通道可提供高達3.5Gbps的傳輸數據率， 在OM3標準的多模光纖中，傳輸距離可達到300米以上。SNAP12 4發4收光模塊的工作光波長為850nm，28Gbps為單通道速率3.5Gbps，40Gbps為單通道速率5Gbps，50Gbps為單通道速率6.25Gbps，80Gbps為單通道速率10Gbps。模塊適應各種嚴酷的工作條件，工作溫度范圍寬、耐潮濕、抗振動、抗電磁干擾，可廣泛應用于車載、機載、艦載、高海拔等環境。產品有商業級、工業級和軍品級多個質量等級可供選擇。模塊提供了與 I2C 協議相兼容的兩線串行數據端口，提供模塊內的各種監控和狀態信號，通過軟件升級，可為用戶提供更多的功能。